FIBARO ZWave Sgl Switch InWall

$115.00 $103.00

Quick Overview

The Fibaro Z-Wave Single Switch Controller is a wireless controller which can control appliances or lighting up to a maximum load of 2.5kW 10A.

  • Control the ON-OFF function of a circuit remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling


Product Details

The Fibaro Z-Wave Single Switch Controller is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

This Fibaro Z-Wave Single Switch Controller requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.

The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.

The Fibaro Z-Wave Single Switch Controller also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera 3/Lite
  • Raspberry PI with RaZberry Card
  • Fibaro Home Controller 2/Lite
  • DHS Z-Wave Universal Remote Controller
  • DHS Z-Wave Mini Remote Controller

Please check the maximum load before installing or operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide installation compliance certificate from your electrician.

Product Support


⇒ Fibaro Z-Wave Single Switch Manual (Size: 1.57 MB)

Videos / YouTube:

⇒ Fibaro Home Center 2 Presentation

Technical Specifications

RF ProtocolZ‐Wave RF Frequency921.42Mhz ‐ AU/NZ  approved RF for Z‐waveZ‐Wave device typeZ-Wave Switch, Routing SlavePower110-230V ± 10% 50/60 HzOperation RangeUp to 15m indoors with no obstaclesApplicationIndoor use only, up to 2.5kW resistive load, 10AOperation temperature0 ~ 55 °CStorage temperature‐10 ~ 80 °CWeight50gHousingABSComplianceEN 55015, EN 60669-2-1Regulatory Compliance Mark
(LxWxH) 42mm x 37mm x 17mm


There are no reviews yet.

Be the first to review “FIBARO ZWave Sgl Switch InWall”

Your email address will not be published. Required fields are marked *