GOAP Z-Wave Sgl Switch

$160.00 $110.00

Quick Overview

The GOAP Single Switch is Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc …). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted  behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.” width=”390″/>

Supported switches

Module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.



Product Details

• Compatible with any Z-Wave Controller.• Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm• Power monitoring accuracy P=5-50W, +/-3W; P˃50W, +/-3%;• Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125°C• Support for the connection of digital temperature sensor (optional part)• 2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc, … Product Support


Do not connect the module to loads exceeding recommended values. Connect the module only in accordance to the  manual and diagrams below. Use only quilified electrician!


⇒ Installation Manual   (Size: 795KB)

Videos / YouTube:

⇒ The smallest Z-Wave module

⇒  GOAP Single switch

Technical Specifications

Product Name  Flush 1 relayPowered by24V DC or 240V ACOperation Range30mMax Load2300W (230VAC)Radio frequency921.42 MHz (AU/NZ Z-Wave)Power Consumption0,4WOperation temperature-10 -+40 C*Measured temperature range0,5o C (within 0o C – 40o C range) (optional sensor)Temperature measuring accuracy0,5 CHousingABSDimensions (W x H x D)41,8 x 36,8 x 15,4mm


There are no reviews yet.

Be the first to review “GOAP Z-Wave Sgl Switch”

Your email address will not be published. Required fields are marked *